Conditions: +27°C, 2-4m/s breezing wind
Gear: EDgun Leshiy, H&N Grizzly 31gr
Today was perfect weather to test and validate wind drift data for H&N Grizzly 31gr bullets from Leshiy. I used piece of particle board as a target (approx. 30x30cm) and after validating windage, despite the moderate breezing wind, I was able to land every bullet into the board.
Some preliminary testing with Leshiy. I don’t own a LDM yet, so I had to get rough estimate from Google Maps using landmarks as a pinpoints. Distance I got was approx. 160 meters, but as this is only rought estimate, I cannot use any results from this as a real data for my further calculations.
I was shooting 31gr H&N Grizzly bullets straight out of the tin without even looking at them and after some scope adjustments, the gun was printing very nice groups. Best was just over 10cm as seen below.
With 31gr bullets there is only 30J left at 160 meters and some bullets got stuck in the particle board and didn’t make through the 22mm board.